Califone PA916 Owner's Manual download pdf (Page 6)

CD PLAYER Continued

6 SKIP/REVERSE When REV is pressed from the Stop mode, the program will go back one track and begin playing

the last track on the CD. When pressed from Play or Pause mode, the program will go back to the

beginning of the track which was already playing. Continuing to press REV will step back one

track at a time.

7 REPEAT/ENTER Pressing Repeat once will continuously replay the selected track. Pressing it twice will replay all

tracks continuously. Pressing Repeat a third time will clear the settings.

8 SHUFFLE Pressing Shue from Stop, Play or Pause will result in random selection of tracks and begin

playing continuously. Pressing Shue again will clear the program.

9 PROGRAM In Stop mode, press Program and observe “P 1: ” on the LCD. Press FWD and see “1:01”, press FWD

again and see “1 :02”. Press enter and “2” will appear in the upper right of the LCD. Press FWD three

more times and see “1:05”. Press Enter and see “5” added to the LCD. Press play and the second track

will play, then advance to track 5. After playing all the selected tracks the program advances to the

end of the CD. Pressing Play will repeat the program. To clear the program in the Stop mode, just

press Program. Individual selections can be cleared while they are playing by pressing Program.

This will not aect other selected tracks.

10 EJECT Pressing Eject from any mode will advance the program to the last track on the CD and eject the

CD. “NO dISC” will appear on the LCD.

NOTE: The CD player is capable of playing CD, CD-R and CD-RW discs, however due to the condition of the disc or the original it

was copied from some discs may not play.

9 10

Powered Companion Speaker PA919PS

The Powered Companion PA has the same amplier, power supply and speaker compliment as the full featured PowerPro PA919. It

does not have the mixer panel because it can be controlled by the PowerPro PA919.

With the integral 16-channel selectable wireless UHF receiver, it can function as a stand alone PA speaker when using a Q319 Handheld

microphone or the M319 Beltpack transmitter with a NM-316, OE-316, LM-316, CM-316 or HBM-316 microphone. Although there

are 5 LEDs on the front of the PA919PS only 3 lights function on this unit because there is only one receiver. The red LED indicates

RF, the amber LED is for audio, and the green LED indicates power On.

Full Wireless Operation

As the transmitter on the PA919 is preset on channel 13, the receiver of the PA919PS is also set on 13. Any audio from the PA919

can be transmitted to the PA919PS without wiring. There is no limit on the number of PA919PS speakers that can be used with the

PA919 within a range of 150 feet.

Audio Line Buss

When linking one or two PA919PS speakers to the PowerPro PA919 via audio line, the PSC-50 XLR cable is connected to Audio Line

Out XLR connector on the PA919. The other end is connected to Line In XLR on the Powered Companion Speaker.

The Master Volume Control on the Audio Line panel of the master will adjust the PowerPro PA919 as well as all the Powered or

Passive Companion Speakers, however the loudness needs to be adjusted via the Master Volume Control on the PA919PS as well.

Note: The mute switch on the PA919 will silence all speakers connected to it by cable. However in the full wireless mode using the

transmitter of the PowerPro the mute will have no eect.

califone_919_manual_rev1.indd 12-13 6/22/09 1:16 PM

1 2 3 4 5 6 7 8

No comments

Califone PA916 Owner's Manual Page 6