Note: Remove the protective pad from behind the cassette door before inserting a cassette tape.
1 RECORD Press this key together with either F. PLAY or R.PLAY to Record.
2 REWIND Press this key to rewind the tape.
3 REVERSE PLAY Press this key to Play the tape backwards.
4 STOP Press this key to stop the tape.
5 FORWARD PLAY Press this key to play the tape forward.
6 FAST FORWARD Press this key for Fast Forward.
7 MODE Press this key to select one of the following 3 modes.
1) The tape will play to the end in either direction and stop automatically.
2) The tape will play to the end in the forward mode, then reverse and play to the end of the other side of the tape in Record or Play
3) This mode provides continuous play operation in the Play function.
8 MODE LED INDICATORS
9 SPEED ADJUSTMENT
10 COUNTER
11 COUNTER RESET BUTTON
12 EJECT
7 8
Cassette Recorder/Player
Normal speed; center position. Turn
clockwise to increase the speed in
3% increments up to 15%. Turn counter
clockwise to reduce the speed in 3%
increments down to 15%.
The counter is a 3-digit LCD display.
Reset to “000” by pushing the button.
This button opens the cassette door.
The APSS (Automatic Program Search System) allows the user to skip the program being played
and move the tape in the Forward or in the Reverse direction to the next program or to the previous
program. It operates on the principal that there is a short period of silence between programs.
When the Tape Deck is in the Play mode and the “FF” is momentarily pressed and released within 0.5
sec, the tape advances rapidly until the next program ahead is reached. At this point, the tape stops
momentarily and playback of the next program starts.
When the Tape Deck is in the Play mode and the “FR” is momentarily pressed and released within 0.5
sec, the tape rewinds rapidly until the beginning of the previous program is reached. At this point
the tape stops momentarily and playback of the previous program starts.
CD Player
1 CD SLOT
2 LCD DISPLAY
3 PAUSE/PLAY
4 STOP
5 SKIP FORWARD
Automatic Cassette Program Search System
NO dISC
After the power is turned on the LCD display will read “NO disc” Gently push the CD into the slot and
the CD will be recognized and begin playing track #1.
When “Play” is pressed, the rst track will begin to Play. When Play is pressed again, the mode goes to
Pause. When pressed a third time the mode returns to Play.
When STOP is pressed from Play or Pause the program is advanced to the end of the last track on the CD.
When FWD is pressed from the Stop mode, the program will advance to the rst track. When pressed
from Play or Pause mode, the program will advance one track. Continuing to press FWD will advance
one track each time.
1 2 3 4 5 6
12
11
10
9
8
7
1 9 8 4 3
2
7 10 6 5
califone_919_manual_rev1.indd 10-11 6/22/09 1:16 PM
(12 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals