Califone 2395IRPLC-6 Owner's Manual download pdf (Page 6)

Visit us online at califone.com Visit us online at califone.com

Getting Started

When the ‘Power’ button (1) is depressed the LED (2) to the left of the LCD display (3) will be red for standby mode. Pushing the LED

will cause the LED to be green indicating the unit is fully powered up.

• Depressing the ‘Tape’ (4) button will cause the LCD display to show ‘Tape’.

• Depressing the ‘AM/FM’ (5) button will cause the LCD display to show ‘AM’ or ‘FM’.

• Depressing the ‘CD’ (6) button will cause the LCD display to show ‘Disc’.

Digital Volume Control

• Press ‘VOL q(7) to reduce or ‘VOL p(8) to increase the volume.Tthe level will be shown in the LCD panel.

Minimum volume will show ‘00’ and maximum volume is ‘40’ on the LCD display.

Treble and Bass Controls

‘TREBLE p (9) and ‘TREBLE q (10) can be used to adjust the Treble up and down respectively, while ‘BASS p (11) and ‘BASS q(12)

can be used to adjust the Bass up and down respectively. Both Treble and Bass can be adjusted in the range of +5 to –5.

EQ Control

Press ‘EQ’ (9) to select the equalizer as sequence.

Radio Function

• Press ‘AM/FM’ (5) to select the desired reception band. Extend the telescoping antenna (13) for FM. There is a built-in antenna

for AM reception. For FM stereo reception the ‘stereo’ will show on the LCD display.

• Press the ‘TUNER p (14) or ‘TUNER q (15) button repeatedly until the desired station shows on the LCD display.

• To automatically scan through the frequency bands, hold the ‘TUNER’ button down until you see the speed of the LCD

display increase. Scanning will stop when a strong signal is detected.

continued page 6

Radio Function continued

VOL 04

VOLUME

Electronic Volume Control Display

BASSTREBLE

TRE+2

BA-1

570

AM KHz

AM BAND SELECTION

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Califone 2395IRPLC-6 Owner's Manual Page 6